PREempt CS20 is a ready to use sterilant and high level disinfectant built on Accelerated Hydrogen Peroxide, made for reprocessing heat sensitive semi critical and critical devices that cannot go through heat sterilization. CM Nails Supply carries the 1 gallon size for customers across Canada.
- It is a sterilant and high level disinfectant powered by Accelerated Hydrogen Peroxide.
- It comes ready to use, so you never mix it or add an activator.
- A 20 minute soak delivers both sterilization and high level disinfection.
- The formula is aldehyde free and contains no volatile organic compounds.
- It needs no special ventilation, and one batch can be reused for up to 14 days.
- This listing is the 1 gallon size.
What is PREempt CS20 used for?
PREempt CS20 is used to reprocess heat sensitive semi critical and critical devices when heat sterilization is not suitable. Accelerated Hydrogen Peroxide, often shortened to AHP, blends common ingredients with hydrogen peroxide to raise its germ killing strength. That lets the solution reach sterilization and high level disinfection within a practical contact time.
How do you use PREempt CS20?
You clean the instrument first, then soak it in undiluted PREempt CS20 for 20 minutes. The steps differ slightly depending on the type of device.
For semi critical devices
- Clean the instruments and equipment thoroughly, either by hand or mechanically, with a suitable cleaning solution.
- Place the cleaned, rinsed and dried items in undiluted PREempt CS20.
- Let them soak for 20 minutes, then rinse with sterile or potable tap water.
For critical devices
- Clean the instruments and equipment thoroughly, either by hand or mechanically, with a suitable cleaning solution.
- Rinse and dry the items before they go into the solution.
- Place the cleaned, rinsed and dried items in undiluted PREempt CS20.
- Let them soak for 20 minutes, then remove them and rinse with sterile water.
Why choose PREempt CS20?
PREempt CS20 saves time because it is ready to use and finishes the job in 20 minutes. The oxidizing action of hydrogen peroxide also helps stop any bioburden left after cleaning from sticking to surfaces. Because the formula has no aldehydes, no volatile organic compounds and no need for special ventilation, you avoid some of the harsher chemicals found in other reprocessing products.
The active ingredient breaks down into water and oxygen, which lowers the environmental impact. A single batch can stay in use for up to 14 days.
Frequently asked questions
How long do instruments soak in PREempt CS20?
Twenty minutes. That contact time applies to both semi critical and critical devices.
Do you dilute or activate PREempt CS20?
No. The solution is ready to use and goes on undiluted, with no activator needed.
Do you rinse instruments after the soak?
Yes. Rinse semi critical devices with sterile or potable tap water, and rinse critical devices with sterile water.
How long can you reuse PREempt CS20?
You can reuse one batch for up to 14 days, which helps you get more value from each gallon.
Related Products
